Home > St Croix Davits, Cranes & Accessories > Davit Accessories
Sort By:
Page of 1
1.25" Clamp on Cam Cleat Pair SCHook1 Caribiner, Snap Shackle LED Deck Lamp
1.25" Clamp on Cam Cleat
Price: $39.00 /ea.
LED Deck Lamp
Price: $59.00
Cam cleat clamps to any 1.25" stainless steel tube by tightening just two screws. Two spring loaded cams secure your line and still allow for easy adjustment. Great for securing lines to your davit system or keeping your block and tackle neatly in order. All materials are made and sourced in the USA. All stainless steel carabiner with welded eye.  SWL 900#s  Same as used in our St Croix Davit systems.   Sold as pairs 18 watt, 6 element LED Deck Flood Light.   Our own private label light.  Current draw only 1.5 amps at 12 volts.  Diecast aluminum housing. Black Powder Coated Finish  Guaranteed for 2 years
Eyebolt Kit "D" Ring Lifting Patch D Ring Lifting Points - PVC
2 Point Eyebolt Kit
Price: $65.00 /ea.
D Ring Lifting Points
Price: $65.00 /Pr.
Two Eye Bolts Mounted on the transom of your inflatable to attach a lifting sling.
  • Kit includes two additional eye bolts that mount on the exterior of your transom for attaching tie down restraints to your inflatable.
Kit contains "D" ring patches that are glued to the bow of your inflatable tube and used to attach a lifting sling.
  • Patches available in either PVC or Hypolon.
  • Kit contains two patches.
  • Patch Diameter is 5 3/4".
  • Glue Not Included.

Kit contains "D" ring patches that are glued to the bow of your inflatable tube and used to attach a lifting sling.
  • Patches available in either PVC or Hypolon.
  • Kit contains two patches.
  • Glue Not Included.

Upper Clamshell Mount Spacer for Rotating Davit 2" Upper Clamshell Mount Spacer for Rotating Davit 3" Pigtail
Stainless Steel Pigtail
Price: $89.00 /ea.
Upper Clamshell Mount Spacer provides 2 inches of additional spacing between the upper mount of SC400 or SC488 davit system Upper Clamshell Mount Spacer provides 3 inches of additional spacing between the upper mount of SC400 or SC488 davit system A 6" cable that connects to a single pad eye on the face of a RIB storage locker.
  • Pigtail consists of 6" cable, Stainless Steel Ring, and Stainless Steel Carabiner.
  • Sold Individually.
Ratchet Straps 5/16" Lifting Lines - 50' Lifting Sling
5/16" Lifting Lines - 50'
Price: $99.00 /Pr.
Lifting Sling
Price: $119.00 /ea.
An accessory with a thousand different uses. Use a pair to secure a load in your davits or hold a cooler in place. Every boat owner should have at least a pair of these on board.

  • Straps come in two sizes:
    • 1" wide (25mm) x 6' long (1.83m) black nylon web.
    • 1" wide (25mm) x 9' long (2.74m) black nylon web.
  • Ratchet and hooks are stainless steel
  • Sold In Pairs
Pair of 50' 5/16" Lifting Lines A stainless steel cable sling used to lift the bow and stern of your tender. Sling consists of stainless steel ring, two stainless steel cables of equal length, and two stainless steel carabiners.
  • Available in 13", 15", 17", 19", and 21" Lengths.
  • Use with St. Croix Model #350 & 400 davits only.
  • Sold Individually.
5/16" Lifting Lines - 75' Strongback 5/16" Lifting Lines - 99'
5/16" Lifting Lines - 75'
Price: $148.50 /Pr.
Strongback
Price: $175.00 /ea.
5/16" Lifting Lines - 99'
Price: $196.02 /Pr.
Pair of 75' 5/16" Lifting Lines Stainless Steel lifting bar eliminates the use of bow lifting slings.
  • Provides a lower lifting point.
  • Reduces tension on D rings.
  • Available in 20" & 24" lengths.
  • Sold Individually.
Pair of 99' 5/16" Lifting Lines
Stern Lifting Yoke Clamp on Kayak/Paddleboard Rack for St. Croix Davit Systems
Stern Lifting Yoke
Price: $295.00 /ea.
This unique mount eliminates the need for separate lifting straps on the transom of your inflatable.
  • Yoke mounts below your motor and does not interfere with its operation
  • Distance from transom to yoke eyebolt is 7 1/2" (19.1 cm).

Conveniently carry your Kayak or Paddleboard with you on the water. This clamp on rack attaches to your your St. Croix davit system or any 1" to 1 1/2" Stainless Steel Tube. Made from 1 1/2" schd.40 aluminum pipe, each arm feature welded end caps with screw in eye bolts, a welded base plate for receiving the clamp assembly, and rub rail to prevent any damage to your equipment.

Rack includes two individual arms and all hardware needed for installation.

PLEASE INDICATE THE STAINLESS STEEL TUBE SIZE RACKS WILL BE MOUNTING TO.